home *** CD-ROM | disk | FTP | other *** search
/ BBS Toolkit / BBS Toolkit.iso / wildcat / wlist141.zip / SAMPLE.CFG < prev    next >
Text File  |  1992-09-20  |  9KB  |  219 lines

  1. c:\wc30
  2. c:\area1\files.lst
  3. c:\area1\files.zip
  4. Pkzip
  5. -o
  6. Include 1-5 25-45 51 53 58
  7. d
  8. y
  9. y
  10. y
  11. y
  12. y
  13. y 1
  14. y
  15. Y
  16. List
  17. y
  18. For Public Description - Adult Files -
  19. 32-45
  20.  
  21.  
  22.  
  23. WildList will Ignore everything past the 19th line, Comments are Ok !
  24.  
  25. Command Line Parameters :
  26.  
  27.        New Files Listing:
  28.  
  29.        A command Line like this :  Wildlist wildlist.cfg 30
  30.        will generate a file list or (and) a bulletin file of all
  31.        new files uploaded in xxx days.  Be sure to specify a config
  32.        file for this set up.
  33.  
  34.        Global File Listing:
  35.  
  36.        A command Line like this :  Wildlist Wildlist.cfg Global
  37.        will generate a alphabetized file list of all the files
  38.        you have specified on line 7. Its best to use the Exclude
  39.        Command on this type set up since the entire file database
  40.        is scanned.
  41.  
  42.        Adding a File:
  43.  
  44.        Normally, Wildlist will only update an existing file in the
  45.        Wildcat database with the fresh file stats if the freshen
  46.        option is turned on by Line 9.
  47.        Sometimes, people create a new list that is not in the database
  48.        already, and the sysop must manually add the file and move it.
  49.        Wildlist has a new command line parameter for this :
  50.        Wildlist Wildlist.cfg Add 28
  51.        If a command line like the above is used, wildlist will create
  52.        the database entry with the filename and path specified in your
  53.        config file then freshens it.
  54.        The Add switch must always be the 2rd parameter and the Area which
  55.        the file should put in will always be the 3rd parameter.
  56.        With this option, you still need to enter the file description as
  57.        wildlist will only create the Filename, Size, Date, and Default
  58.        flags in the database.
  59.        Remember, if your path to this file is different from the area
  60.        that you specified, the actual filepath will be inserted into
  61.        the database, making the file still available.
  62.  
  63.  
  64.  
  65. 1st  Line - Path to the MAIN Wildcat directory;
  66.  
  67. 2nd  Line - Path AND Filename of the output file.  This is the Ascii
  68.             file we create before compression ! It can be put anywhere
  69.             now with any name.  c:\text\files.txt
  70.  
  71. 3rd  Line - Path and Filename of the Compressed File.
  72.             If your not using the Freshen Option then you can use any
  73.             Path/Filename you like : d:\bbsstuff\allfiles.zip
  74.  
  75. ***NOTE***  If you are using the Freshen Option then
  76.             This Path should be the same as the one in makewild for the
  77.             area were your file list will reside.
  78.  
  79.             Example : ( In Makewild, File Area Definition )
  80.             Say your Downloadable BBS list is in area #5...
  81.             Highlight area 5 and press enter. The FILE AREA PATH
  82.             is the path you want to use + the filename your bbs list
  83.             named in your database.
  84.             So if your File Area Path for area 5 is  C:\General\
  85.             and your Downloadable file list is named Allfiles.Zip then
  86.             Use  c:\general\allfiles.zip
  87.  
  88.  
  89.  
  90. 4th  Line - Name of the Compression Utility to use + Any pre switches (a e).
  91.             These switches are between the command and filename.
  92.             Put the word NONE here if you do not want this option.
  93.             ( ARJ.EXE Add -d -y ) These are example switches only !
  94.             If your compression utility is not in your dos path then
  95.             use the full path to that utility :  C:\Arcers\Arj.exe Add -d -y
  96.  
  97.             Again, the above switches were used for an example only.
  98.             Refer to your Compression Utility's Docs if you need more info.
  99.  
  100.  
  101.  
  102. 5th  Line - Compression Utility Options (after the filename).
  103.  
  104.  
  105. 6th  Line - This is the areaname space character -> ▓▓▓▓ GAMES ▓▓▓▓
  106.             An + would cause the area Name to be spaced like this:
  107.             +++++++++++++++++++++ Games +++++++++++++++++++
  108.             Any Character should work fine here.
  109.  
  110. 7th  Line - Areas to Process ( Write to the list ) .
  111.             Use the either the Include or Exclude command both not
  112.             both.
  113.             Include 1-21 25 28 30-49   Process only these areas.
  114.             Exclude 1-21 25 28 30-49   Process all areas except these.
  115.  
  116.             Delimeters - Everything that has a dash will be considered
  117.             as everything in between. 1-25 = 1 thru 25.
  118.  
  119.             Spaces and Commas - 21 24 30  will mean areas 21 24 30 Only.
  120.                                 21,24,30 is the same as above.
  121.  
  122.            The 3 delimeters can be used together as 1-10 13 15 18,20 27-40
  123.  
  124.  
  125. 8th  Line - S = Single Line  D = Double Line  Same output as WCPRO!
  126.  
  127. 9th  Line - Do you wish to Freshen the File Size and Date in Wildcat ?
  128.             This gets the Info from the file that resides where makewild
  129.             points. See Line # 3 .
  130.  
  131. 10th Line - Check for the Optional ###.Hdr Area Header Files ?
  132.             If 1.HDR exist and this option is turned on then your
  133.             Area Header Name Will be replaced by the Contents of
  134.             the 1.HDR File. You Can Have 1  xxx.HDR file per Area
  135.             with the xxx being replaced by the Area Number (Y or N).
  136.  
  137.  
  138. 11th Line - Write File Size and Total at the bottom of each Area
  139.             and also Grand Total of files listed and Total Bytes
  140.             at the very Bottom of the List. ( Y or N ).
  141.  
  142. 12th Line - Makes a small list of the Top Ten Downloads for Each Area;
  143.             (Y or N)
  144.  
  145. 13th Line - Inserts the Ascii file Ad.Hdr at the beginning of the file
  146.             list if it Exist.  (Y or N). I use my Zip Comment.
  147.  
  148.             This also puts a file called 'End.Hdr' at the end of the list.
  149.             If your creating bulletins, All the files will be .Bul instead
  150.             of the .HDR , Thats so you can use @Codes@ in the bulletins
  151.             and not the Downloadable List.
  152.  
  153.  
  154.  
  155.  
  156. 14th Line - Do you wish to append Results to Wildcats Activity Log (Y/N)
  157.             If Yes then enter log number (Node);
  158.             Example: Y 1    this will append to Activity.001
  159.  
  160. 15th Line - Do you want to Delete the Original output file ? (Y/N)
  161.             This is refering to Line 2.
  162.             This Only Works if Line 4 is set to something besides None.
  163.             ( We don't want to delete the file if we didn't archive it. )
  164.  
  165. 16th Line - Do you want to show Passworded Files (Y/N).
  166.             If you say Yes then they will show a P in place of the |.
  167.             Offline Files will also show an O in place of the |.
  168.  
  169.             PW-ONLY will make a list of PASSWORDED files only.
  170.             If you select double line output, the password will be
  171.             included also.
  172.  
  173.  
  174. 17th Line -  Accepts : BULL  LIST  BOTH  ( See Below )
  175.  
  176.              BULL - will create a bulletin Only with the @color@ codes Only.
  177.                     useage > BULL  Bul1.cfg
  178.                     Bull.cfg is the name of your config file that contains
  179.                     all the @COLOR@ stuff you want to use for that bulletin.
  180.                     See the sample Bul1.cfg file.
  181.  
  182.              LIST - Creates a normal File List - No Parameters - No Color
  183.                     usage > LIST
  184.  
  185.              BOTH - Creates a bulletin and a Normal File List.
  186.                     Uses the same Parameters as BULL
  187.                     useage > BOTH Bul1.cfg
  188.  
  189.              <<< See inside the Bul1.cfg sample file for more info >>>
  190.  
  191. Line 18 - Do you wish to insert your own desciption ?
  192.           Example -  You wish people to see your adult file list before
  193.           they get access... You can enter a default file description
  194.           for the public to see instead of the regular description.
  195.           For your normal adult list, you would ofcourse want the real
  196.           Descriptions.  If your not sure of this option, you can contact
  197.           me or leave it alone, or maybe even experiment with it.
  198.  
  199. Line 19 - This would be the alternate file description.
  200.  
  201. Line 20 - These are the areas that will get the Alternate file descriptions.
  202.           usage : 31 32 34-38  or 31,32,34-38  All files in these areas will
  203.           have the description from line 19 inserted, the rest of the areas
  204.           would have the regular database description.
  205.  
  206.  
  207.  
  208.  
  209.  
  210.  
  211.                                Richard Skinner
  212.                               409-260-1883 Voice
  213.                             409-846-0754 HST 14.4
  214.                                 Fido 1:117/112
  215.  
  216.  
  217.  
  218.